• No Products in the Cart

Guest Post: DIY Dress Form

DIY dress form

My name is Melissa Taylor Jenkins, owner and designer of the clothing brand Katastrophic.  I’ve been following Madalynne for a while now – I absolutely love that it’s a blog for people who want to sew their own beautiful and well crafted clothing. A few weeks ago, I mentioned to Maddie that I had built a DIY dress form that I have found really helpful in my own designing and sewing, which I thought might be useful to her readers. Maddie invited me to write a guest post, and I’m so excited to share with you what I’ve learned about working with dress forms – how to find or make one that is truly professional, and a few basic ways they can drastically enhance your sewing and designing process.

Personalized dress forms can be incredibly helpful for the seamstress who is making her own clothing.  I’m sure a lot of you have dealt with the frustration of trying to test fit, and pin, and drape garments on yourself. Having a dress form with your own body measurements can make the whole process a lot easier and actually more creative.

A truly professional dress form is one that has important reference lines (center front, center back, side seams, and princess seams) sewn into the cover, and a soft surface that you can pin fabric to. In my opinion, adjustable dress forms, though tempting, are not the best option because the gaps in the forms are exactly on these reference lines, making it impossible to pin or measure anything that is perfectly balanced.  They can be helpful for adjusting the fit of an existing garment, but not for creating a new pattern or design.  The inexpensive ones often found at craft stores (cough-dritz-cough) are exceptionally low quality and are often not stable enough to be functional.

For someone who is primarily sewing to make their own clothing, I recommend that you consider making your own personalized form.  There are a lot of great tutorials on the internet for DIY dress forms, but in my opinion the best ones are the foam forms.  I made one and it cost me around $100.  They are not only lightweight and durable, but you can easily stick pins in them just like any professional forms. PGM and Wolf are some of the best known brands which run around $300 and $800-$2000+ respectively, and it’s possible to have one custom made to your measurements, but as you can imagine, it’s quite expensive.

Duct tape or paper Kraft tape forms are the fastest and least expensive to make, but they are also difficult to pin into and unfortunately make your pins gummy and unusable.  I learned this from experience with the first DIY form I made using Kraft tape years ago. If you are interested in making your own personalized foam dress form, I’ve written a tutorial documenting the process. In a nutshell, you use plaster bandages to create a mold of your body, fill it with construction foam, remove the plaster mold, and cover the foam with a layer of batting and stretchy fabric. It’s a lot of work, but in the end you get a very satisfying, functional, and accurate form to work with.

Whether you are using a professional form in a standard size or a DIY dress form that replicates your exact shape, these are my favorite ways to get the most of your form:

adjusting_the_fitWhether it’s complete or in-process, fitting is much easier on a form than on your own body.  If your personalized form is accurate enough, you can pin and adjust the fit on the form without having to twist to reach and see everything in a mirror. I recommend using the form first to get the fit close, and then of course testing the fit on your body before making it completely final.

necklinesDesigning or adjusting necklines is super easy and accurate on a form.  Drafting necklines on paper usually takes me multiple revisions because the curve looks different lying flat than it does wrapping over the shoulders. It can also be tricky to get the neckline to transition smoothly over the shoulder seam.  With a dress form, I can mark exactly the neckline I want using yarn and straight pins, and then transfer that line to my paper pattern after tracing it on muslin.  Of course, you can also mark any kind of seam or style line on your form this way, and then copy them to your fabric and paper pattern.

drapingDraping directly on the form allows you to respond naturally and intuitively to your fabric. I’ve seen a lot of dress makers who start with a corset base and skirt lining as a foundation for intricate draped gowns, but you can start with any basic foundation for designs with intricate pleats or folds, depending on the overall fit and silhouette you want.  You can try out some classic draping techniques from a book (Draping Basics by Sally DiMarco is a good one that we use at Austin School of Fashion Design), or try completely experimental draping- it’s creatively freeing and inspiring!

katastrophic design

11 Comments

  1. Reply

    Natasha Estrada

    I’d helped make of those foam ones years ago but never thought you could make a full body. Unfortunately my sample size bifrictated form takes up what little space I have for a form and I can’t bear to get rid of it because its a wolf. *sigh*

    • Reply

      Melissa

      I don’t think I mentioned this, but the legs of my dress form actually do come out of the base of the stand so you can use it for pants! Of course a suspended stand would be the most useful for making pants, but this way at least it’s possible if not the easiest solution.

      • Reply

        Natasha Estrada

        Well as long as you can get them on thats the main thing. The suspended stands can be annoying because sometimes they swing around a lot

        • Reply

          Melissa

          true that! 🙂

  2. Reply

    hannah

    I’ve been meaning to make a full body dress form like this for quite a while now. I’ll definitely be following this tutorial sometime soon!

  3. Reply

    French Toast Tasha

    I made a duct tape form years ago. It’s covered in a tight T-shirt with lines for center front, waist etc. drawn on it, so I can pin into that, but it’s not perfect as the shirt can shift around. I love how professional, and lovely this form looks. If I decide to make another one I think I’ll upgrade to this technique.

  4. Reply

    Lisa

    This is a great tutorial. I love her clothing line, too. I checked it out…really creative and well thought out.

  5. Reply

    Natasha Estrada

    Hmmm I had an additional thought. What if you made one just the upper half of the torso for bras.

  6. Reply

    Amanda Russell

    This is by far the most beautiful DIY dress form I’ve seen yet – I know I really need a dress form but haven’t purchased one yet as I’ve yet to find one available here that’s not one of those awful adjustable ones. This seems definitely worth the effort! Thanks for sharing! 🙂

  7. Reply

    lisa

    This idea does sounds pretty awesome!

    i actually found some cheap dress forms that probably can be altered for DIY purposes as well, and they are pretty nice just the way they are 🙂

    http://www.amazon.com/Black-Female-Dress-Form-Medium/dp/B004JFZHG4/ref=sr_1_1?m=A1X9XJGJN1DON9&s=merchant-items&ie=UTF8&qid=1396989259&sr=1-1&keywords=B004JFZHG4

Leave a Reply

RELATED POSTS