How To Grade Undies: Update

how to grade undies update1 How To Grade Undies: Update

Since sewing lingerie, I have researched many bra and undie grading, I have graded these types of garments on my own, and have found that there is an easy and accurate way to grade an undie pattern.

First, what is grading? Grading is the process of creating a size range of patterns for a particular garment. It’s the process of creating a size 4, 2, and 0 pattern from a size 6 pattern or a size 8, 10, and 12 pattern from a size 6 pattern. Typically, a middle size such as a size 6 or a size medium is drafted and then graded up and down because grading can only be done two or three sizes at a time before pattern shapes are distorted.

To make it more confusing, grade rules depends on the particular garment. An example is the body length grade of a t-shirt. On this type of garment, the grade for body length depends on the length of the garment. If the body length is longer than 25,” then body length grades ½”, if the body length is between than 25” and 18,” then body length grades 3/8”, and if the body length is less than 18,” then body length grades ¼”. So essentially, every garment has a different grade and grading is done on a case-by-case basis.

I didn’t develop my own set of grading rules for undies. Instead, I used standard grading rules to determine the grade rule for a simple undie like the one shown above. When I worked in tech, we would “release” the grade of a particular garment once it was “approved for production.” At this stage, we would evaluate the garment and use standard grading rules to come up with a grade tailored to that style. Using the example of the t-shirt, if the body length was more than 25″, then the body length graded 1/2.” But what about the front neck drop? If the front neck drop was less than 5,” then it graded 1/4″ but if the front neck drop was more than 5,” then it graded 3/8.” So again, every garment had a different grade and grading is done on a case-by-case basis. This is exactly how I determined the grade for this type of undie.

The first step in grading is defining a size range, such as XS-XL  or 0-14, and making sure that your size range is consistent and proportional. This means that if a size 2 has a bust/waist/hip ratio of 33”/25”/35”, then a size 4 has a bust/waist/hip ratio of 34”/26”/36”  – each one increases by 1.” A grade would not be proportional if a size 2 had a bust/waist/hip ratio of 33”/25”/35” and size 4 has a bust/waist/hip ratio of 35”/26”/36” – the bust increases by 2” while the waist and hips increase by 1.” Dixie explains very well grading and grading proportionally here if you’re still confused.

Now let’s get started. For most of my undies, I define the size range to be XS-XL (most stretch garments are alpha sized while most tailored/woven garments are numerically sized). Next, I define my grade rules. From size XS to sizes S and M, the total circumference from size to size at the waist and hip increases by 2” (which means that the garment increases 1” flat and each pattern piece increases ½” at waist and hip). From sizes M to L and XL, the total circumference from size to size at the waist and hip increases by 3” (which means the garment increases by 1 ½” flat and each pattern piece increases ¾” at waist and hip). Why does the grade rule  “jump” from 1” to 1 ½” from size M to sizes L and XL? To be honest, I don’t know; it was the way I was taught in the industry.

Some textbooks say to grade the height of an undie depending on where the crotch seam is (if the crotch seam is located more towards the back of the undie, then the body length grade for the front is more and the body length grade for the back is less). But for simplicity, I keep the body length grade for all sizes the same for front and back – ½”. I’ve never had a problem doing it this way. Plus, undies are made with super stretchy fabrics so it will stretch to fit many sizes and shapes.

Why does the body width grade “jump” from M to L and XL but the body length grade stays the same for all sizes? This is going to sound odd to write and read, but it’s because as the body gets bigger, it gets wider at a greater rate than it gets taller.

The crotch width does not grade because from size to size, this area of the body does not get bigger/wider.

With grade rules defined, it’s now time to actually grade. The steps below are for the front pattern but the same applies to the back pattern.

{step 1} On a large piece of paper, draw a vertical line the length of CF plus 5 inches
{step 2} On a separate piece of paper, trace and cut out pattern, making sure there are no seam allowances included (grading is always done without seam allowances)
{step 3} Place the cut-out pattern on the larger piece of paper and lining up CF of pattern with vertical line, trace pattern
{step 4} Remove cut-out pattern and draw a line perpendicular to vertical line at the crotch level (this is where the grade is “held”)
{step 5} Mark ¼” up from waist at CF/SS and mark down ¼” from crotch at CF and side (this will make a total length grade of ½”)
{step 6} Mark ½” out from side seam at top waist and leg opening
{step 7} Using the cut-out pattern as a guide, draw in the new pattern shape. Shift up, shift out, shift down, and draw in new shape, keeping pattern at the hold line for each size increase. Because the pattern does not grade at the crotch, redraw leg opening by blending to original crotch width and ensuring the integrity of the leg opening curve is maintained (see diagram for clarity/more understanding).

You may be saying, “Wait a minute! What about Casey’s slash and open method of grading?” Well that methods works too. Just like with everything else in this hobby, there are several ways to grade. I chose this method for two reasons. One, because of the simplicity of the an undie pattern and two, because it is based on the old school “shift” method. During my tech days, an older tech brought in a hand cranked grading machine she used way back when. By winding / cranking a handle on the side of the machine, just like a jack-in-the-box, the machine would shift the pattern up, out, and down and draw the new pattern.
post footer pattern making How To Grade Undies: Update

tags: Pattern Making Comments: 12

12 Comments
  1. Natasha Estrada

    Did you end up developing your own set grading rules for your panties? I love the old dariomatics. I would love to get my hand on one but I have no sensible use for one unless I start grading shoe patterns

    Reply
    • Maddie Flanigan

      No, I didn’t develop my own set of grading rules – I used standard grading rules to determine the grade rule for a simple undie like the one shown in the diagram (which is usually how simple my undie patterns have been). When I worked in tech, we would “release” the grade of a particular garment once it was “approved for production.” At this stage, we would evaluate the garment and use standard grading rules to come up with a grade tailored to that style. Using the example of the t-shirt, if the body length was more than 25″, then the body length graded 1/2.” But what about the front neck drop? If the front neck drop was less than 5,” then it graded 1/4″ but if the front neck drop was more than 5,” then it graded 3/8.” So essentially, every garment had a different grade. This is exactly how I determined the grade for this type of undie – I didn’t make up my own rules for no reason.

      Reply
      • Natasha Estrada

        Oh yeah totallyif you had access/knowledge to a refined grade rule library then make your own doesn’t make sense until you really got a feel of who was wearing your stuff. So now everyone is waiting for the product release. :D

        Reply
  2. Truly Myrtle

    I keep reading a just seeing words and numbers. Clearly I’m going to have to pin this and come back with a coffee and my glasses.
    The photos you posted the other day were drop dead gorgeous. I can’t wait for a pattern :)

    Reply
  3. sallieforrer

    I woke up this morning thinking about bra and undie making – oh the brain of a sewing enthusiast!

    Reply
  4. Amy

    Haha, this is like looking at my computer right now! I came up with my own rules based on stretch percents, but once I got the hang of it I really preferred the shift grading.

    Reply
  5. Angela

    This is a great tutorial, one that I would be sure to use if I was making panties!!

    Reply
  6. Maggie Smith

    Another great tutorial! I love the technical side of pattern grading/drafting almost as much as I love the tactile pleasure of sewing a garment! Thanks Maddie!

    Reply
  7. Julianne Siadek

    This is so wonderfully technical, and timely, as I’m about to start re-sizing a pattern I made for bootie shorts. I generally grade in about the same way, but not as accurately as you do; I go more by “feel” and hope that it turns out right.

    Reply
  8. Brigid

    Hi Maddie! Could you possible give us a tutorial on grading a bra pattern?
    Thanks so much!

    Reply
  9. Kerry Bufton

    I have a panties pattern that has a front and back seam, not side seams, how would I grade this?

    Reply
    • Maddie

      I would treat it as a pant – with a front and back rise – so I would grade both 3/4.” Does that make sense?

      Reply

Leave a Comment

Your email address will not be published. Required fields are marked *